Product overview: Fluke 1AC II Non-Contact Voltage Tester
The pocket-sized voltage detector
The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know theres voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.
Key features
Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
Continuous self-test so you always know its working
Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
Audible/Silent mode for added convenience
|
Specifications |
|
|
Operating Principles |
Senses the steady state electrostatic
field produced by AC voltage through insulation without requiring contact to
the bare conductor. A red glow at the tip and a beeping noise (if not
switched OFF) indicates the presence of voltage. |
|
Voltage sensing ranges |
Nominally, 90 V AC to 1000 V AC |
|
Detector tip style |
Flat-tip |
|
Light source |
One high intensity red LED |
|
Agency Approvals |
|
|
Safety |
IEC 61010-1: Pollution Degree 2, IEC
61010-2-030: CAT IV 1000 V |
|
EMC |
IEC 61326-1: Portable |
|
IP Rating |
IP 40 |
|
Operating Temperature |
-10°C to 50°C (-14°F to 122°F) |
|
Operating Humidity Ranges |
0% to 95% (0°C to 30°C) |
|
|
0% to 75% (30°C to 40°C) |
|
|
0% to 45% (40 to 55°C) |
|
Operating Altitude |
3000 m |
|
Cleaning |
Clean with damp cloth |
|
Batteries |
2 AAA alkaline batteries included |
|
Battery Life |
Typical battery life of greater than
1 year |
|
Warranty Period |
Two years |
Models: Fluke 1AC II Non-Contact Voltage Tester
Fluke 1AC II
Fluke 1AC-II Non-Contact Voltage Tester
